| Door Leaf - To Positioned Centrally Within The Frame Width Hardware Shall NOT Be Fitted To The Meeting Edges | ||||
|---|---|---|---|---|
| Certifcate Number | Fire Rating | Maximum Height | Maximum Width | |
| CF808 | FD60S | 2257mm at 925mm Wide | 1024mm at 2040mm High | |
| Door Frame | ||||
| Material | Minimum Density | Minimum Width | Minimum Thickness | |
| Hardwood (Excluding Ash, Beech & Iroko) | 640kg/m3 | 90mm | 44mm inc 58mm Wide x 10mm Deep Scallop to Hanging Jambs | |
| Lippings | ||||
| Material | Minimum Density | Minimum Thickness Meeting Edges | Minimum Thickness Hanging Edges & Top & Bottom Edges | |
| Hardwood (Excluding Ash, Beech & Iroko) | 640kg/m3 | 10mm | Hanging Edges: 18mm Rounded to Suit Scallop Top & Bottom Edges: 18mm | |
| Intumescent Seals | ||||
| Manufacturer | Description | |||
| Intumescent Seals Ltd | Therm-A-Seal or Therm-A-Blade | |||
| Position | Frame Head | 2nr 20mm Wide x 4mm Thick Therm-A-Blade Intumescent Seals Positioned 8mm Apart Centrally Within The Frame Width | ||
| Leaf Head | 1nr 20mm Wide x 4mm Thick Therm-A-Seal Intumescent Seal Positioned Centrally Within the Leaf Thicknes | |||
| Frame Jambs | 2nr 15mm Wide x 4mm Thick Therm-A-Blade Intumescent Seals Positioned 10mm Apart Centrally Within the Frame width | |||
| Meeting Edges (Primary Leaf) | 1nr 15mm Wide x 4mm Thick Therm-A-Blade Intumescent Seal & 1nr 15mm Wide x 4mm Thick Therm-A-Seal Intumescent Seal Positioned 10mm Apart Centrally Within The Meeting Edge | |||
| Floor Springs | ||||
| Type | Rutland Floor Spring & PS190 Pivot Set OR Any Certifire Approved In Accordance With Below | |||
| Maximum Dimensions | Top Pivot | 165mm Long x 30mm Deep x 25mm Wide | Top Strap | 125mm Long x 16mm Deep x 30mm Wide | Bottom Strap | 235mm Long x 20mm Deep x 24mm Wide |
| Material | Steel | |||
| Floor Spring Intumescent Protection | ||||
| Manufacturer | Description | |||
| Noberne | Interdens & Graphite | |||
| Position | Top Pivot | 2mm Interdens Intumescent Sheet Material Betweeb The Top Pivot Face Plate & The Cover Plate | Top Strap | 2mm Graphite Intumescent Sheet Material To External Face Of The Top Strap | Bottom Strap | 3nr Layers of 2mm Graphite Intumescent Sheet Material To The Externak Face Of The Bottom Strap |
| ||||