SW Panel Heritage Style Doors - Raised & Fielded Panels - FD30
Field of Application Ref: PAR/24514/01 - Valid From: 10/10/2023 & Valid To: 10/10/2028
Configuration Maximum Width Maximum Height
Latched Single Acing Single Door (LSASD) 1101mm at 2202mm High 2740mm at 831mm Wide
Unlatched Single Acing Single Door (ULSASD) 1079mm at 2159mm High 2687mm at 815mm Wide
Intumescent Seals Head:1nr 20 x 4mm Mann McGowan Pyrostrip 100PSA Intumescent Seal Fitted Centrally In Frame Reveal
Intumescent Seals Jambs:1nr 15 x 4mm Mann McGowan Pyrostrip 100PSA Intumescent Seal Fitted Centrally In Frame Reveal
Configuration Maximum Width Maximum Height
Latched Single Acing Double Door (LSADD) 1047mm at 2142mm High 2470mm at 883mm Wide
Unlatched Single Acing Double Door (ULSADD) 1037mm at 2121mm High 2446mm at 875mm Wide
Intumescent Seals Head:1nr 20 x 4mm Mann McGowan Pyrostrip 100PSA Intumescent Seal Fitted Centrally In Frame Reveal
Intumescent Seals Jambs:1nr 15 x 4mm Mann McGowan Pyrostrip 100PSA Intumescent Seal Fitted Centrally In Frame Reveal
Intumescent Seals Square Meeting Siles:2nr 10 x 4mm Mann McGowan Pyrostrip 100PSA Intumescent Seals Centrally In The Meeting Stile Of The Active Leaf, Spaced 8mm Apart,
& 1nr 10 x 4mm Mann McGowan Pyrostrip 100PSA Intumescent Seal Fitted Centrally In The Meeting Stile Of The Passive Leaf
Leaf Framing Materials
Material Element Softwood or Hardwood
(min density 510kg/m3)		 Hardwood
(min density 640kg/m3)
Minimum Dimesnsions Stile & Top Rail 100mm Wide 95mm Wide
Mid Rail (Optional) 200mm Wide 190mm Wide
Bottom Rail 200mm Wide190mm Wide
Intermediate Framing
(Optional) 		90mm Wide 90mm Wide
Panel Configuration & Sizes
Element Flat Panels
Minimum Number Per Leaf 1nr
Maximum Number Per Leaf 10nr
Maximum Size Height 2100mm
Width900mm
Maximum Area 1.55m2
Panel Intumescent Requirements: 18mm Wide x 2mm Thick Mann McGowan Pyrostrip 100ECSA must fill the full width of the groove around the panel perimeter
Door Frame
Element Specification / Dimensions
Frame & Stop Material Softwood or Hardwood Hardwood
Minimum Density 510kg/m3 640kg/m3
Minimum Frame Thickness 32mm 32mm
Minimum Frame Depth 70mm 70mm
Minimum Rebate Depth / Stop Thickness 16mm 16mm
Frame Head Fixings:
  • 2nr 5 x 80mm screws between each vertical & horizontal framing member
  • Screws must be of a suitable length to penetrate each jamb by a minimum of 50mm
    Architraves (Required on All Door Installations)
    Material Hardwood, Softwood, MDF - See FoA For Dims & Densities
    Profile Square / Rectangular or Profiled
    Fixings Mechanically Fixed to Edge of Door Frame & Face of Supporting Construction
    Must Overlap Frame & Supporting Construction By a Minimum of 15mm
    Glazed Apertures - See FoA for Full Details
    Minimum Margins Specification / Minimum Dimensions
    Component Softwood or Hardwood
    (Min Density 510kg/m3)    		 Hardwood
    (Min Density 640kg/m3)
    Stile 100mm 95mm
    Top Rail 100mm 95mm
    Intermediate Rail 90mm 90mm
    Bottom Rail 200mm 190mm
    Additional Notes:
    • There MUST be a minimum 90mm margin between each glazed aperture and any hardware item
    • This minimum dimension MUST be measured edge-to-edge NOT centre to centre.
    • This may necessitate an increase in the minimum margins detailed above.
    • The margins above also need to be maintained between glazed apertures & panels
    Glass & Glazing Systems
    Glaas Manufacturer Maximum Aperture Width Maximum Aperture Height
    Pyroguard 875mm at 1475mm High 2010mm at 642mm Wide
    Glazing Systems 7mm Pyroguard (Uninsulated Glass) 15mm Pyroguard (Insulated Glass)
    Essential Hardware
    Component Dimensions Quantity Intumescent
    Hinges 90-105mm H x 30-36mm W x 2.5-3.5mm T Leaves up to 2299mm H - 3nr
    Leaves Over 2300mm H 4nr     		Not Required
    Surface Mounted Closers Any Surface Mounted Closer Tested to BS476-22 or EN1634-1
    When Fitted to Timber Door Leaves in Timber Frames1    		 1nr Not Required
    Locks Max Lock Body - 108mm H x 78mm W x 14mm T2 1nr 1mm Interdens Behind Forend & Strike Plate
    Flush Bolts 200mm L x 20mm W x 19mm D 2nr
    (Fitted to Top & Bottom of Meeting Edge of the Passive Leaf)     		Mortice Lined With 1mm Interdens Sheet Material
    Additional Notes
    1. Surface mounted closers MUST NOT be installed directly above a glazed aperture containing non-insulating glass. The closer must be offset from the side of the glazed aperture by a minimum of 100mm
    2. Imperial Locks G4050 Latch, G7000 Sashlock & G7007 Deadlock fall within lock body dimensional requirements noted above
    • See Technical for a Full Specification Check Prior to Quotation
    • See Field of Application Report for Full Details of Constructional Requirements


    Back